unknown

asked Jan 14, 2003 at 5:45pm
Hp HP DeskJet 600

HP LJ 4100 Lines

Faint line on printed page, line is visable on fuser rollers, Problem is a repeat as the fuser was replace a month ago, also replaced cleaning roller, new toner cart (oem). Machine has only printed 600 pages with replaced NEW fuser assy.

Advised greatly appreciated.


Thanks.
are the lines horiz or vert on a 8.5 X 11 size paper?
And are they evenly spaced apart?
If so measure the distance from one line to another in Millimeters
by unknown on Jan 16, 2003 at 2:57pm Add comment
Thanks for the reply. Line is veritical, as mentioned, fuser was replaced with a new one (not refurbished) my concern is that if I order a replacement, I maybe missing what is causing the line. I have done a complete cleaning of this machine.

In-sight appreciated.
by unknown on Jan 16, 2003 at 10:22pm Add comment
Try printing a page from tray 1(manual feed). Just as the trailing end of the page enters the printer, open the top and remove the toner cartridge. You should have a piece of paper with print on it before it goes into the fuser. If the line is on the page before it enters the fuser, You have a bad cartridge. If not, the line is being put there by the fuser.
by david belton on Jan 17, 2003 at 7:45am Add comment