asked Jan 30, 2001 at 4:32pm
Apple Apple LaserWriter 360

Select 360

My Apple Laserwriter Select 360 flashes the out of paper light and gives the "Printer fixing temperature malfunction" message after being on a short period of time. I understand that this is either the power supply or the fuser.
1) Do you have a new video to address this?
2) If it is the power supply, are replacements available?
3) If it is the fuser tube, are replacements available?
Thanks - great site!
You didn't check out our Printer Repair kits section. You'll find what you're looking for there.
by moe on Jan 30, 2001 at 6:15pm Add comment
Okay, I'll give the 2 light kit a shot. If this is the kit you want people to buy when only one light is blinking, it may be helpful to have that problem on the list also. Perhaps with the explanation that it might be the power supply. If this doesn't work, do you know where I can get a power supply?
by Matthew on Jan 30, 2001 at 8:37pm Add comment
Every one I've ever had on that model has been the lamp burned out. Not to say that it couldn't be the power supply, but it's not likely. The lamp is a lot cheaper. Don't know where to buy power supplies. I've got some good used ones if it comes to that.
by moe on Jan 31, 2001 at 2:44pm Add comment
Your two blinking light repair kit worked like a charm on my one blinking light problem. Would recommend this service to others. Let me know if you have any resources for ink jets! THANKS!
by Matthew on Feb 2, 2001 at 6:36pm Add comment
When I turn my printer on, the middle of the three lights on my laser writer select starts blinking. When I check out the printer, it says that it is fixing a temperature malfunction. Is this what happened to you? If so, was it the fuser repair kit that helped you?
by Charlotte on May 1, 2001 at 5:48pm Add comment
The kit will fix the fixing temperature malfunction. I guess there's only one blinking light on the Select printers. All of Apple's other laser printers have 2 blinking lights.
by moe on May 1, 2001 at 6:50pm Add comment
Yes, I got the temp malfunction error.Yes, the kit fixed it.
by Matthew on May 2, 2001 at 4:48am Add comment
My 360 will not print on the right habd side. New Toner Carridge and that did not help!!
by Mike on May 15, 2001 at 6:31pm Add comment
Check out our Printer Repair Kits section. There's a kit there that will fix the problem.
by moe on May 15, 2001 at 7:01pm Add comment
the repair section has a 2 blinking light kit for the 360 and a fuser assembly kit for the lw pro 630. is the 2 blinking light kit the correct one to fix the problem?
by unknown on May 25, 2001 at 9:39am Add comment
They are two totally different printers by different manufacturers. Each kit has a description of the problem it fixes.
by moe on May 25, 2001 at 5:13pm Add comment