Bill D

asked Jan 30, 2001 at 4:16pm
Lexmark Lexmark Other 4029

lexmark 4029

all i get is a blank page
i have no error codes
all connections look good
it sat around for about 8 months
Without any error codes, it could only be 2 things. Lack of high voltage or the drum not turning. Check 2 things. See if the transfer corona wire on the bottom of the machine is broken. If it is, the toner won't be pulled down on the paper. Other thing is make a mark on the edge of the cartridge drum. If it moves, it's ok. If it doesn't the drum isn't turning so no image.
by moe on Jan 30, 2001 at 6:20pm Add comment
Lexmark 4029-30 is making grinding noises and getting error 921 messages.
by Anonymous on May 16, 2001 at 10:18pm Add comment
I periodically get "921 Service" message on the LED readout. When I turn the printer off & on again with the power switch, it comes back to ready right and prints just fine. The toner cartridge is practically new, and the print is fine when I finally get it.
by unknown on Sep 24, 2001 at 6:00pm Add comment
According to the Lexmark error code page on this site, that is a fuser error. Since it is intermittent, I'd suspect it is a fuser lamp on the way out. If you want to try replacing it (not easy) we have lamps (no video instructions)
by moe on Sep 25, 2001 at 9:37am Add comment
Bill
Check the shutter on your cartridge, if it doesn't open and close right, it will cause blank pages.
by Andy on Sep 25, 2001 at 2:03pm Add comment