Erik Hein

asked Feb 28, 2011 at 12:22pm
Konicaminolta Konica-Minolta MagiColor 2430DL

Konica-Minolta 2430DL

When the printer is turned on, it goes through the calibration mode without any problems, however, when I send a test page to the printer it comes up with a “FATAL ERROR CODE 23H"
Please help
2.3.17 23H: Faulty Waste Toner Near Full Detection Board
1
Check the PWB-C connector for proper connection
and correct as necessary.
- -
2
Check the PWB-A connector for proper connection
and correct as necessary.
- -
3 Change the Drum Cartridge. - -
4 Change PWB-C. - -
5 Change PWB-A. - -
by dmzcompute on Feb 28, 2011 at 7:09pm Add comment