asked Oct 10, 2002 at 10:19am
Hp HP LaserJet 4

HP 2000c Firmware Error 441

My faithful HP 2000c has let me down. I am receiving an Error 441 - Firmware error. I followed the HP Knowledgebase directions and cleaned the printhead contacts, re-inserted the ink catridges and verified that all 4 ink pump buttons are fully raised and the springs work just fine (although one was stuck down at first - it popped up after I pressed it a few times).

Any suggestions?

I get the same error, only I got it after replacing the entire ink cartridge assembly

My conclusion is I might have used a magnetic screwdriver during the process and that 'might' have had an adverse affect on the machine.

Let me know if you solved your problem.

by Anonymous on Aug 23, 2005 at 2:43pm Add comment