asked Sep 17, 2002 at 1:01pm
Hp HP LaserJet 4

Exit senser HP LJ 4

I had the accordion folding problem and
replaced the output assembly. Now the leading edge of the paper
only gets 1.5" past the fuser and the printer stops
with a PAPER JAM message. The exit senser arm
appears to be moving freely. The spring is not
stretched. However, I can avoid a
paper jam message by physically holding the
exit senser arm while a page is coming out
of the fusing assembly area. I cleaned the dust
off the exit senser switch. What's my next step?

[email protected]
Check exit sensor flag on fuser.
by unknown on Sep 17, 2002 at 6:06pm Add comment