alfousseynou bomou

asked Jan 18, 2006 at 6:06am
Hp HP LaserJet 5SI

HP LaserJet 5si printer

I have a printer HP LaserJet 5si which, each time that an impression is launched, requires to load tray 1. One is obliged each time to press on "online" then on "selection" so that the printer charges starting from tray 2 or of tray 3.
What is necessary to make?
Which is the cause of this?

Tanks in advance.
Try performing a cold reset. You MUST take out the jet direct card. Press and hold On Line while powering the printer on. Hold down On Line until RESORING FACTORY SETTINGS message appears. This will restore the factory default settings. If this doesn't work you need to check how you are printing from your computer through the printer properties.
by Anonymous on Jan 18, 2006 at 7:04am Add comment
Check the green seperater bar in your tray. It is probably hitting the A4 slot at the back of the tray. So even though you have regular letter paper in it the printer thinks you have a different size loaded. You need to make sure it is hitting the LTR slot. Another way to check is to pull the tray all the way out and look at the 4 white spring loaded levers on the back left of the tray. Make sure the far right one is down. Those levers tell the printer what size paper you have loaded.
by unknown on Jan 25, 2006 at 11:33am Add comment