Dan

asked Jan 12, 2002 at 4:17pm
Hp HP LaserJet 4

Laserjet 53.11.03 Error Code

I have a laserjet 4 printer which works like a charm. I just purchased a HP 4si JetDirect ethernet card which i was told would be compatible with this printer. I installed this card and now upon power up, i get a 53.11.03 error.

I think this is the SIMM RAM, Slot 1, Power up Ram Test failed code, but I don't see how the jetdirect card could be affecting it.

Any ideas on what the problem is? The Jetdirect card is brand new so i assume that works. Is this card truly compatible with the Laserjet 4???

Any help appreciated. Thanks.
dan
That would be a simm problem. I don't see how the Jet Direct card could affect it. You could pull the card out and see if the error goes away. The 4si card should work in the 4.
by moe on Jan 12, 2002 at 10:56pm Add comment
Its weird though. WHen the jet direct card is plugged in, i get that error, however when the jet direct is not installed, everything works fine.

Dan
by unknown on Jan 13, 2002 at 8:02am Add comment
It's unlikely, but the jet direct card could be causing the problem. I've seen a couple of printers where the jet direct card caused the whole printer to go dead after less than a second of operation. I've got a few good used jet direct cards on the shelf. Email me for pricing and ordering info if you're interested.
by moe on Jan 13, 2002 at 11:37am Add comment
im having the same problem and i dont know what to do.

someone can help us please
by Anonymous on May 19, 2009 at 2:37pm Add comment
Is that before or after you read this thread? You'll have to do that and try the suggestions before we help you any further.
by moe on May 19, 2009 at 2:41pm Add comment
error immediately appears when i put on printer.
by unknown on Apr 29, 2011 at 11:05am Add comment