asked Sep 30, 2005 at 2:57pm
Apple Apple LaserWriter 360

Apple Laserwriter Select 360

I just replaced the cartridge in this printer and it now just prints half of the page. It does not finish printing any of the pages. It prints half of page one, half of page two, etc. What could have gone wrong? Does anyone have an idea how I can fix this problem? I appreciate any help you can give.
A cartridge wouldn't do that. It could cause half of the page left to right not to print, but if it's only printing the top half I'd suspect a memory issue. Try printing something simpler.
by moe on Sep 30, 2005 at 3:20pm Add comment
Thanks Moe for your quick reply, but how do I fix it?
by Anonymous on Oct 2, 2005 at 10:59am Add comment
You'd need to add memory. To do so, you remove the top cover (2 screws in front) Then there is a metal shield on top covering the formatter. Lots of screws holding it from falling upwards in case gravity got reversed. SIMM slots are underneath. You should be able to find chips for it online.
by moe on Oct 2, 2005 at 11:17am Add comment
Thank you very much for your help. I will try this right away.
by Anonymous on Oct 3, 2005 at 2:51pm Add comment