unknown

asked Sep 22, 2005 at 2:12pm
Hp HP Color Copier 120

hp design jet 120

I am experiencing the following difficulties when using the hp designjet 120

1. the manual feed is very sensitive and paper needs to be aligned perfectly before the printer will accept it, then during multiple copies of a drawing A1 for example if you dont load the paper quickly enough the printer freezes out and no buttons including power work. The printer has to be switched off at the power source and re-started.

Is there a setting that can be altered to correct this situation and not lead to a freeze out?

They are quite fussy about alignment etc. as a norm & as for the "freezing", sounds more like a software issue to me!
Just a useless thought!
Dazz UK
by hpwizard on Sep 22, 2005 at 2:18pm Add comment
Check out the Yahoo designjet group.

HP ripped off all it;s cuatomers on this printer it is almost impossible to laod paper..they want you to buy the $500 auto feeder.

I guss you can overcome the problem by taping a short leader to the paper this way the auto feeder sees the perfect edge it is looking for.
by tomcat on Nov 15, 2005 at 10:56am Add comment