asked Oct 16, 2004 at 2:43pm
Epson Epson Stylus Photo 1200

Epson 1200

I have an Epson 1200 which prints fine except sometimes it prints black and yellow ink where ever yellow ink should be. The black is always a lower percentage than the yellow except when I print the test page (the one with four diagonal bars of each color) I get 100\% black and 100\% yellow where the yellow bars should be. Any suggestions?
Try cleaning the cap assembly and wiper pad.
by unknown on Oct 17, 2004 at 5:32am Add comment
David: Its also possible that your problem is being caused by a build-up of dust, dirt, lint and hair that sticks to the wet ink on the bottom side and backside areas of the Printhead Assembly. That build-up acts like a small paint brush and can transfer wet ink to the paper as the printhead assembly moves back-n-forth. Sometimes that build-up simply smears the wet ink already on the paper, during the normal printing process. Once those two areas are thoughly cleaned, the problem may simply go away. Check for a couple of e-mails from me that should help in that area, in case you want to do that cleaning and at least eliminate that possibility...Good Luck! Denny Conway
by Denny Conway on Oct 18, 2004 at 12:05pm Add comment