Eric

asked Mar 16, 2004 at 2:57pm
Epson Epson Stylus Color 3000

epson 3000 horizontal alignment

I am setting up an Epson 3000 that had been damaged bla bla bla. I have it up and running with only one problem. The black prints about 1/16 inch higher than the colors. I have run the print head alingment but that only applies to vertical alingment. Any help would be great. I have had the case apart and see there are adjustments that can be made to the head I just dont know what they do.
Eric: The best thing to do, is to refer to the actual Epson Service Manual, for available adjustments, servicing and troubleshooting. I checked and the "EPSON Technical Repair Information/Service Repair Manual", for your Epson Stylus Color 3000 Printer, can be downloaded in Adobe Acrobat format, [from the UK web-site] at " http://www.epson.co.uk/repair/inkjet.htm ". I hope it helps, because I seldom actually work on the "3000's, 5000's & 5500's", because they are normally sent back to the Epson Repair Facility for servicing and repairs...Good Luck! Denny Conway
by Denny Conway on Mar 16, 2004 at 3:19pm Add comment