asked Apr 11, 2001 at 12:38pm
Apple Apple StyleWriter II

Paper black streaks

I have an Apple Laserwriter II NT. Just replaced the power module and fuser assembly. Everything seems to be working fine, print is clear. Today while printing out a number of pages of a document I see dark streaks on each of the pages. The fuser roller "cleaner" is just slightly darkened along one edge (new one). Could the problem be with the toner cartridge? This is a new problem. The cartridge has been used for some time and is a refilled cartridge. Thank you for any suggestions.
Turn the cartridge over and open the shutter. You'll probably see the problem on the drum unit.
by moe on Apr 11, 2001 at 2:02pm Add comment
Thank you Moe for your reply to my problema. The cartridge roller has toner on it so obviously there is my problem with the straking which has become very, very bad. A new cartridge seems to be the solution - I hope. By the by, can I use an HP cartridge rather than an Apple replacement cartridge (they are much less expensive)?
by Milton on Apr 11, 2001 at 2:48pm Add comment
The price on those has gone up quite a bit lately. Supply and demand at work. HP92295A or
Canon EPS will work, whichever is cheaper. Same
components and toner used in both, don't let anyone tell you different.
by moe on Apr 11, 2001 at 3:14pm Add comment