asked Mar 9, 2001 at 4:35pm
Unknown Printer

LJ 1100 multi sheet feed

Hi Moe:

Thanks for the kit for my LJ 1100. It seems to work well with no more multi sheet feeds and jams. However, I noticed when I did the fix on my machine that if you screw in the pick-up roller assembly too tight on one side or the other, it may draw in sheets of paper at an angle and print at an angle. So I just want to offer a tip to others - when you re-install the pick-up roller assembly on your Laser Jet 1100, only turn the screws until they are snug. There is no need to over torque them. If you get crooked printing, remove an re-install the pick-up roller mechanism.

I hope this helps.