BNVAutomation

asked Nov 15, 2018 at 1:16am
Unknown Printer

Fuser unit extremely hot

We are using KM BizhubC258 if we use 280gsm with thick4 selection. Paper is not moving. Please help.

Regards,

Sadashiva. G

+9845465237

[email protected]


1) The fuser units get hot when the device runs for a long time without break.

2) Allow the device to cool down for some time and resume your work.

3) If the device still gets hot, ensure that the print media used is compatible.

4) Load a smaller stack of print media and try operating the machine.

5) If these steps did not work, the fuser needs to be replaced with a new one.

6) Get a genuine fuser from the manufacturer certified retailers and replace it on your device.

by jessicamichael on Nov 29, 2018 at 1:15am Add comment
-1

Thanks for such a great article here. I was searching for something like this for quite a long time and at last I've found it on your blog. It was definitely interesting for me to read about their market situation nowadays <a href="http://www.pmptraininginchennai.in/">pmp training and certification in Chennai</a> | <a href="http://www.pmptraininginchennai.in/">pmp training in velachery</a> | <a href="http://www.pmptraininginchennai.in/">project management courses in chennai</a> | <a href="http://www.pmptraininginchennai.in/">pmp training class in chennai</a> | <a href="http://www.pmptraininginchennai.in/"> pmp training fee</a>

by amsaleka on Nov 20, 2018 at 3:51am Add comment