elxtechasked Mar 1, 2016 at 7:15pm
won't print pgbk patter
I have a canon pixma mg5200 and it won't print the top grid pattern on the nozzle test page. tried new cartridge and don't want to buy a new head if that won't fix it. pls help
You can try cleaning the head first. Canon heads come out easy. Take the inks out and there is a plastic release lever on the right of the assy. Lift it and reach in and pull the head assy. out. Take it over to the sink and run hot tap water through the screens on top and then flip it over and run the water over the print heads on the bottom. Repeat a few times until the water runs clear and reinstall. It might take a few tries to get the ink to replenish in the head.
I tried that three times already but no luck. I did a deep clean and a small, very light version of the grid showed up on the nozzle print test then disappeared on the second and third tests. After doing the deep test the ink levels on the cartridges went lower as expected except for the big one which had no decrease at all. I applied a small amount of ink onto the screen to see if that would do anything but nothing happened. I'm thinking it's a purge issue but I'd sure like other people's opinions before I rip it all apart for nothing.
Ich beschloss, eine binäre Optionen machen, der erste Schritt in diese yavlyaetsya Erstausbildung arbeiten und die Grundlagen .. Put Options and Call Options Trading ist, warum ich ein paar Elemente aus einigen Websites wählen, wenn Sie fragen können vospolzovatsya http://put-call-options.com/de/buyingselling/60-second-binary-trading-strategies