unknown

asked May 20, 2000 at 6:37am
Nec NEC SuperScript 610

nec 610

The paper sensors seeem to have failed. It does not recogise that it has paper in it.
Any clue?
The NECs are a real problem to repair. NEC won't supply parts to anyone. I had this problem once and had an NEC tech who wupplies me with parts. His advice was that the sensor was so flimsily constructed that even a new one could fail out of the box. He said to just remove it and jumper the connections.
by moe on May 20, 2000 at 3:01pm Add comment
Thanks for the comments. Is this sensor in the roller assembly or in the main body of the machine. I have found one lever inside tht makes the red paper out light change to the green light when pressed just right
by mark on May 21, 2000 at 5:41am Add comment
The sensor is located under the cover to the left of the paper holder assembly. The cover is pretty easy to get off, I think there are only 2 screws holding it on. I don't work on too many of those as they are considered disposable printers.
by moe on May 21, 2000 at 7:07pm Add comment